Cap CaliCap for your California Büssli

 The Büssli team has put together this top hat for you!

• Two-tone (silver beanie / anthracite side panels)
• Front window + left/right to open
• Roll-up function 

The HighTec membrane fabric Airtex is characterized by absolute waterproofness, robustness and durability. At the same time, the fabric is breathable - so you don't have a problem with moisture under the hat.

Due to the hat and the "insulating cap effect" you have optimal protection in bad, cold and also in good weather.

Good to know - the "insulating cap effect"

 Due to the further material system, a protective air cushion is formed.

• Effect 1: The permanently installed cotton bellows no longer get wet.
• Effect 2: The insulating effect of the air cushion. Lower interior temperature in summer, less heat loss through the erected roof in winter.
• A constant distance of approx. 4 cm between the cap and the roof ensures good ventilation without moisture accumulation.

NEW! The roll-up function for the new California models with tent bellows that open at the front. You can roll up the cap at the front, left and right and fix it at the top edge. 

In addition to the standard accessories, you will also receive 2 piping stones and two additional tensioners for the straps to securely fasten the rolled-up cap. The zippers are equipped with pull cords and can be pulled from bottom to top (deflection point at the top of the cap) and from top to bottom.

The material and the finish

• Airtex, 195g/sqm, silver coated
• Front-roof-rear in one piece.
• Double-stitched side panels inserted
• 10 metal eyelets for securely fastening the cap to the piping strip.
  (The positions of the eyelets also allow the Cali cap to be securely fastened if you have installed an awning).

What's in Delivery

- Cap
- 8 aluminum ridge pieces with Isalink tensioner
- Rubber cord (attachment behind the awning)
- 2 folding suction cups Ø 75mm in anthracite and two special tensioners for the windscreen
- Storage bag with drawstring

Easy to store!

The bag is designed so that the cap stowed in the bag fits between the seat and backrest of a chair in the tailgate.